Stiver Engineering was retained to provide structural design through a reinforced concrete foundation design for the hydrotest machine and the steel building that covers the machine in Houston, Texas. We designed the machine foundation as a pit to capture and provide water storage for the reuse of water during the testing procedure. The reinforced concrete pit is 47 feet by 12.5 feet by 13 feet deep.
Stiver Engineering provided construction consulting through a local precast manufacturer with a precast building design. The building, located in Houston, Texas, was designed to be delivered to the site as an assembled structure or as individual precast panels to be assembled onsite, and we designed lifting hooks for installing the panels and roof.
This project required steel fabrication, sandblasting, and painting for two buildings on a 35-acre property located in Northeast Harris County. Stiver Engineering provided structural engineering through designing the building foundations for loads associated with steel fabrication, sandblasting, and painting, and the designs included drilled shaft design, grade beam design, building anchor bolt design, rail design for carrying fabricated steel through paint booths, and a slab on grade design.
Stiver Engineering assisted in the development of a 9-acre, raw land property located in North Harris County, Texas with no prior development. The services required included existing drainage analysis, proposed drainage analysis, storm sewer designs, grading plans, and more. We also provided the client with a reinforced concrete foundation design for a 23,000 square-foot steel fabrication building.
Stiver Engineering provided site development through permitting services for our client, and the project was permitted by Harris County and TxDOT.
One of our clients approached us with a need for site development services for the development of a 35-acre, raw land property located in Northeast Harris County, Texas that had no previous development. The services rendered for this project included existing drainage analysis, proposed drainage analysis, grading plans, ditch designs, culvert designs, and more. The building foundations were designed for loads associated with steel fabrication, sandblasting, and painting, and the designs included drilled shaft designs, grade beam designs, and building anchor bolt designs.
Stiver Engineering provided site development through permitting services for the client, and the project was permitted by Harris County.